Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Yakima Holdup Wheelstrap
$5.99
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Swagman 1/2
$42.00
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Keeps Swagman hitch racks secure and stable - Unique hidden pin cylinder for added security - Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks - Threaded
Swagman 5/8
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Unique hidden pin cylinder for added security - Fits 2" only equipped racks - Threaded
Swagman Deluxe Bar Adapter
$45.00
Whether it’s a city bike with a step-through frame or full-suspension mountain bike, some bikes just may not work well with a car rack that suspends the bike from its top-tube. Swagman's Deluxe Bar Adapter changes that. This telescopic bar hooks under the stem and around the seatpost to create a "top tube" that the rack can hold. It features vinyl-coated, quick release hooks so it's gentle on your bike and easy to use. The 19-inch Deluxe Bar expands up to 26-inches in length.
Evo Top Tube Adapter
$59.99
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.
Yakima 1-7/8-inch Trailer Coupler
$69.99
Coupler for 1-7/8 " balls for RACKandROLL trailer.
Yakima 2-inch Trailer Coupler
$69.99
Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty
Yakima BaseClip
$74.99
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima Boa Wheelstrap
$13.99
Rear wheel strap for Boa bike mount. Includes one strap.
Yakima Bolt TopLoader
$154.99
A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty
Yakima Chain Straps
$19.99
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima EXO GearTotes
$84.99
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Yakima End Caps
$24.99
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima Fat Bike QR Locking Skewer
$64.99
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima Felt Pads (Sweetroll/ Hullhound)
$34.99
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima HD Hook Straps
$64.99
For tried-and-true security, our new HD Hook Straps deliver maximum strength with a proven hook attachment to easily hold larger cargo in place. Designed to work with Yakima EyeBolts and integrated attachment points on our OverHaul HD, OutPost HD and HD Bar, they also work great with other tie-down points. These straps are quick and easy to adjust—load and go! - Our proven Heavy-Duty Straps with durable, vinyl-coated hooks - Easily attach to our EyeBolts, or other tie-down points, for a secure hold - 10-ft. length handles a wide range of gear and supplies - Set of two - Weight: 1.00 lbs - Some assembly required
Yakima HandCuff
$89.99
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Yakima Heavy Duty Straps
$44.99
Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Yakima Joe Pro Safety/Wheel Straps
$9.99
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
Yakima K323 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima K450 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima Landing Pad 21 (Set of Four)
$259.99
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
Yakima Landing Pad 23
$149.99
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Yakima Landing Pad 25
$149.99
Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
Yakima LockNLoad Crossbar Clamps
$64.99
Use these clamps to attach the LockNLoad platform to an existing Yakima roof rack, factory rack, or other aftermarket roof-rack system. One pair of clamps is required for each crossbar. Check your vehicle fit to verify requirements. Product Details: - Sold as a set of 2 clamps, with included hardware to attach to a single crossbar. - The LockNLoad platform requires 2 or 3 sets of Crossbar Clamps (check your vehicle's and platform's fit requirements for the number of crossbar clamps needed). - Welded steel construction for strength. - Rubber pads protect crossbar finish. - Compatible with all Yakima crossbars, along with many other aftermarket crossbars, factory crossbars, and 2" round or square tubing. - Each set of crossbar clamps adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of crossbar clamps. Never exceed the Yakima- or manufacturer-specified weight limit for your vehicle. Product Specs: - Weight: 1.86 lbs - Dimensions: L 2.75in x W 1.80in x H 1.00in - Some assembly required, 15 minute install
Yakima LockNLoad Perimeter Rail Kit B (for 60x54)
$379.99
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 17.80 lbs - Dimensions: L 44.00in x W 1.50in x H 3.50in
Yakima LockNLoad Perimeter Rail Kit K (for 55x49)
$349.99
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 15.40 lbs - Dimensions: L 37.00in x W 1.50in x H 3.50in
Yakima MightyMount 32H
$29.99
These MightyMounts are simple attachments that make several gear-specific Yakima mounts compatible with Whispbar. - Simple snap-around adapter allows Yakima bike, boat and cargo accessories to be attached to Whispbar rack systems - Quick and easy installation and removal; no tools required - 32H fits onto Whispbar Flush, Through and RailBar rack systems - Allows the attachment of the following Yakima accessory mounts: HighRoller, Raptor, Mako Saddle, LandShark, KayakStacker, HullyRoller, HullRaiser, BasketCase and WheelFork - Sold as a set of 4 and uses the hardware provided with the accessory mount Product Specs: - Weight: 0.47 lbs. - Limited Lifetime Warranty
Yakima New Q-Tower Lock Housings
$39.99
Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).
Yakima OffGrid Accessory Bar
$69.99
Add an additional OffGrid Accessory Bar to custom fit those bulky items in your OffGrid cargo basket. Pin in those coolers, tackle boxes, and duffels to ensure a secure fit for the long haul. Fits Large OffGrid only. Product Details - Accessory Bar for Large OffGrid cargo basket - Quickly attaches to basket frame to help organize bulky items - Mount Yakima gear mounts on top for a true multi-sport adventure - Made from durable, steel for years of rugged use - Compatible with Large OffGrid basket only - 10 Minute Install Sizing: - Large: Weight: 3.43 lbs, Dimensions: L 49.00" x W 1.12" x H 1.12" - Medium: Weight: 2.68 lbs, Dimensions: L 40.00" x W 1.12" x H 1.12"
Page 1 of 2 Next page