In-Stock Clothing & Accessories
We're continuing to add new product to our catalog. If you don't see the bike or cycling gear that you want, please give us a call at either store location and we'll be happy to help you.
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
An ultra-bright, high-capacity USB rechargeable light providing 850 lumens of light output and five lighting levels, plus reserve for longer run times. Dual-zone refractor lens design allows clear near and far visibility focusing the main beam downward to prevent affecting pedestrians or oncoming traffic. The included and optional handlebar mounts provide placement flexibility for mounting cycle computer, RideCase, single light, dual lights, CubiCubi backup battery, GoPro Session Cameras, and more. - Size: 10.4 x 3.8 x 3.8cm / 4.1" x 1.5" x 1.5" (Light+PowerPack) - Lamp: Cree XLamp XHP50.2 - Battery: 3.7V 3000mAh Lithium Ion (integrated) - Charge / Charge Time (Approx): Micro USB / 4-6hr - Input: 5V / 1A - Output: 6V / 1A - Lamp Housing: Forged aluminum / Injection molded polymer - Mount: Handlebar (25.4 - 31.8mm) (Shim included) - Waterproof: IPX 6 - Dual zone refractor lens, Low battery indicator, optional USB charging dock - Weight: 124g / 4.37oz (Light+PowerPack) MODE / BURN TIME (APPROX) - 850 Lumens (High) / 2.1hr - 450 Lumens (Middle) / 3hr - 200 Lumens (Low) / 7.5hr - 70 Lumens (Steady) / 17hr - 70 Lumens (Blinking) / 30hr
Stay clean and stay seen with Topeak's DeFender iGlow X. They're a unique pair of fenders with integrated 0.5W super bright red LEDs for safety at night or during low visibility conditions. The lightweight polycarbonate is tough and flexible, and the stainless steel strut attachment system is easy to install and provides adjustability for excellent tire coverage. Plus, you'll get up to 100 hours of run time on each fender's 2 coin batteries (included).
Topeak's HeadLux helmet light is the Siamese twin of bike lights. This one light does double duty with two super-bright LEDs facing forward and two red LEDs facing the rear. Its 3 modes and wrap around lenses ensure you'll be seen. A nice supplement to your regular light set, the HeadLux is a convenient way to add extra safety to your commute. Plus, batteries are included.
Topeak's RedLite Aero is sleek and fits most seatposts or seatstays with near-perfect aerodynamic precision. This ultra-bright light uses 3 super-bright red LEDs that get you noticed. The AAA battery (included) offers up to 80 hours of run time with constant and blinking modes.
An ultra-bright, high-capacity USB rechargeable light providing 500 lumens of light output and six lighting levels, plus reserve for longer run times. Dual zone refractor lens design allows clear near and far visibility focusing the main beam downward to prevent affecting pedestrians or oncoming traffic, while amber side-lighting adds safety on roadways. The included handlebar mount and adapter provide placement flexibility. MODE / RUN TIME (APPROX) - Hyper: 500>400 lm (70min) (Switch to 400 lm automatically after 20 min) - High: 400 lm (2.6 hr) - Middle: 220 lm (4 hr) - Low: 130 lm (8 hr) - Blinking: 130 lm (50 hr) - Pulse Blinking: 130/400 lm (10 hr) ADDED FEATURES - Dual zone refractor lens, - Amber side-lighting, - Low-battery indicator, - Compatible with PanoComp X Mount LAMP - Cree XP-L LED WEIGHT - 117 g / 4.13 oz BATTERY - 3.7V 3000mAh Lithium Ion (integrated) RESERVE TIME - 0.5 hr CHARGE TIME (APPROX) - 4 hr CHARGE - Micro USB SIZE - 11.7 x 3.2 x 1.2 cm / 4.6” x 1.3” x 0.5” MOUNT - Handlebar (25.4 - 33mm) (Shim included) LAMP HOUSING - Forged aluminum / Injection molded plastic
The new Gen 3 single-sided Stages Power R meter is built on to a drive-side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty
Thanks to its smaller-diameter barrel, with Specialized's Air Tool HP Floor Pump it's easier than ever to inflate high-pressure tires. It also features Specialized's SwitchHitter head that works with Presta and Schrader valves, quality steel construction for excellent durability, and a three-sided base for superb stability. Plus, you'll love the comfortable, wide handle, easy-to-read oversize gauge and the nice, long hose.
Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you. - Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires. - Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires. - Ergonomic Wing handle with pressure relief valve. - Auto selecting SwitchHitter II technology. - Includes spare rubber seal for head. - Max pressure: 40 PSI (2.7bar) - Volume-per-stroke: 508cc
This durable frame pump with SwitchHitter head automatically adjusts for Schrader or Presta valve tubes and shows pressure on a rotatable gauge. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Gauge body rotates for easy viewing. - Durable plastic barrel with aluminum shaft to reduce flex and improve efficiency. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
This durable pump with SwitchHitter head automatically adjusts for Schrader or Presta valves. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
$100.00 - $125.00
Enduro could be characterized as all-around riding, with equal parts uphill and downhill. Likewise, our Enduro Comp Shorts are designed to be true all-rounders on the trail, leaving you with plenty of comfort, performance features, and strength to tackle just about any trail. To make sure of it, we made them from a woven version of our lightweight and ultra-breathable VaporRize fabrics. As a result, the shorts are more than tough enough to take repeated spills while you're finding your line (or losing it), without sacrificing anything to comfort. In terms of fit, you'll find that these shorts fit nicely between our Atlas and Demo lines, meaning that they're certainly baggy but don't go over the top with it. As a result, we cut them to fall just around the bottom of the knee (about three inches shorter than the Demos) with plenty of room for light armor or knee pads. There are also side waist adjustment tabs that keep the waist where you want when the pockets are loaded. And for all-year riding, the Enduro Comp shorts have the added benefit of being treated to be water-repellent. Please note that these shorts do not feature a pair of liner shorts with a chamois. If you're looking for this to be integrated, check out our Enduro Pro Shorts, or take advantage of the Comp's SWAT access pocket and wear any of our SWAT bib shorts. - VaporRize woven fabrics are treated to be water-repellent, while remaining durable, stretchy, and lightweight for peace of mind on the mountain. - One zippered pocket provides a convenient, secure space to store your trail essentials, while a SWAT access side zipper interfaces seamlessly with SWAT bib shorts for immediate access to your gear and nutrition. - Side waist adjustment tabs ensure that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - 13.5" inseam (size 34" waist) fall low around the knee for a roomy fit that leaves plenty of room for pads.
Replacement head for the Air Tool Expert Floor Pump.
Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II
Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.
All the parts needed to mount a Flux Expert headlight to a second bike - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
Be seen, either in the day or at night, with the super-powerful Specialized Flux Expert taillight. The flashing mode automatically boosts the light's output to 110 lumens during the day for up to 14 hours, while making you visible up to a two thirds-of-a-mile (or one kilometer) in full daylight. - Maximum safety, even in the brightest conditions. - 110 lumens output sets new benchmark. - Visible up to 0.6 mile/1.0 kilometer during midday in the summer. - Patent-pending reflector mounting system for perfect aim on 27.2, 30.9mm, and Venge seatposts. - Ambient light sensor boosts light output by 50% while in Flash Mode during daytime running, for increased visibility. - Integrated, flip-out USB tab to charge rechargeable Li-Ion battery in any USB port in under 90 minutes. - All the aesthetics and performance to match the fastest road race, adventure, and commuting bikes. - Three operating modes: Steady, 25 Lumens Surge, 5-55 Lumens Flash, 55-110 Lumens
Unlock all the functions of the Flux light with this two button remote. • Compatible with both the Flux Expert and Elite Headlights. • Lights up while the Flux headlight is on and repeats the Mode button and adds the Highbeam button (see Flux Headlight Manual for details) • Note: The remote is a "slave" unit and can turn a Flux headlight off but does not operate until the headlight has been turned on using the main button on the headlight.
What's better than ripping down the mountain, your riding absolutely on fire? Staying cool while doing it. Our new Enduro Air Short Sleeve jersey uses VaporRize, a super lightweight, breathable fabric, that keeps you cool while feeling comfortable against your skin and protecting you from ultraviolet rays and trial side foliage. Want even more? Okay, its polyester fabric is 100% recycled. - Crew neck collar keeps things casual and comfortable. - Deflect UV 30 protects your skin from harmful, ultraviolet rays. - Fabric Content: 100% Recycled Polyester - Regular Mountain Bike Fit is generous and comfortable. - VaporRize fabric is made from lightweight polyester fabric that is 100% Recycled.
You might say that you love your pack, but the massive sweat stain on your back says otherwise. It's time that you carry your trail essentials in the most logical manner possible—carry them with our Mountain Liner Bib Shorts with SWAT. With them, we were able to create a patent-pending design that houses five integrated SWAT pockets on the shorts themselves. The pockets sit flush against the body, and they're shaped and structured to ensure that their contents won't ever come bouncing out. Additionally, the pockets vary in size and location, which means that you'll always have a perfectly shaped pocket for your big and small items, alike. As for the shorts, we designed them to stand on their own, not literally, but in the sense that you'd love wearing them with or without the nifty pockets. To do so, we made them from our beyond lightweight VaporRize mesh fabrics for the utmost in comfort and breathability, while the 9.5-inch inseam (size Medium) plays nicely with shorts when you're layering. - VaporRize mesh fabrics are extremely cool, comfortable, and lightweight, while creating a dual benefit of being highly effective at moisture wicking and evaporation. - Patented & integrated SWAT pockets house all of your trail essentials, putting everything you need right where you want it. We also included a secure zipper back pocket and two side leg pockets on this bib short for the ultimate amount of cargo space. - 3D Chamois is pre-molded to match the shape of the body for exceptional comfort. - 8.5" inseam (size Medium). - Fabric Content: BODY: 88% Polyester, 12% Elastane, UPPER: 100% Polyester
What's better than ripping down the mountain, your riding absolutely on point? Staying plenty cool while doing it. Our new Trail Air Short Sleeve jersey uses VaporRize, a super-lightweight, breathable fabric, that keeps you cool while feeling comfortable against your skin and protecting you from ultraviolet rays and trial side foliage. - Crew neck collar keeps things casual and comfortable. - Deflect UV 30 protects your skin from harmful, ultraviolet rays. - Fabric Content: Knit 87% Polyester, 13% Spandex - Regular Mountain Bike Fit is generous and comfortable. - VaporRize fabric is made from our most breathable, lightweight fabric that uses a Recycled Polyester blend to create its superior wicking ability.
$100.00 - $119.99
When it comes to choosing the perfect pair of bib shorts, comfort is everything. And for anyone whose rides demand premium materials, superior fit, and cutting-edge technologies, the new RBX bib shorts are sure to be your jam. We designed an open suspender fit and bib construction that's engineered to keep the shorts up and in-place without constricting the upper body. The stretchy elastic suspenders are uber plush and soft against the skin, and accommodate taller torso lengths with ease. A non-stretch, sail cloth center back panel is laser-cut for breathability and anchors the back of the shorts for added stability. Silicone-infused fabric cuffs, meanwhile, provide a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. Our new Body Geometry Contour chamois also adds unrivaled comfort by minimizing its total footprint and keeping only what's structurally necessary. This minimizes pressure on nerves and soft tissue, while also maintaining the optimal level of support. - Soft and supportive four-way stretch fabric provides ample comfort and a soft hand. - Soft mesh bib uppers with binding provide a comfortable hold. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Articulated design ensures the perfect fit while in the riding position. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - Single-density-foam Body Geometry Contour Chamois is pre-molded to match the shape of the body for exceptional comfort. - Slim Fit with a 10.5" inseam.
$70.00 - $75.00
When it comes to choosing the perfect cycling shorts, comfort is everything. Whether you're going fast or just cruising, it's important to know that you'll be comfy. For riders who want premium materials, superior fit, and technologies that you won't find anywhere else, the new RBX Shorts are the jam. The soft four-way stretch fabric and articulated design ensure a perfect fit, but where the real comfort comes is from our new 3D Chamois. It features a pre-molded shape that matches the curve of your saddle, reducing wrinkles and hot spots. Top it off with a super soft top sheet to reduce friction and you're left with all day comfort. - Four-way stretch fabric provides ample comfort and a soft hand. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Articulated design ensures the perfect fit while in the riding position. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - 3D Chamois is pre-molded to match the shape of the body for exceptional comfort. - Slim Fit with a 10.5" inseam (size Medium).
$25.00 - $30.00
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
The perfect pair of bib shorts don't feel like bib shorts—they don't feel like you're wearing anything at all. And from here on out, you'll wish all of the bib shorts you race in would disappear beneath you like the new SL bib shorts. You wanted top-shelf, and you got it. This unmatched comfort comes, in part, from our custom, pre-molded 3D Chamois. Not only is it pre-molded to the shape of your body and saddle to reduce wrinkles and pressure points, but it also features multi-density foam that ensures the utmost in comfort. The other half of the comfort equation comes from the fabrics and the fit. For example, the welded uppers get rid of seams altogether for the most comfortable straps possible, while an articulated design ensures the perfect fit when in the riding position. - 11" inseam (size Medium) - Articulated design ensures the perfect fit while in the riding position. - Fabric Content: MAIN: Knit 78% Nylon, 22% Spandex, UPPER: 78% Polyester, 22% Spandex - Four-way stretch fabric provides ample comfort and a soft hand. - Reflective elements increase your visibility to motorists in low-light conditions. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Slim Fit feels like a second skin. - Tall sizing offered with additional inseam and bib strap length for taller riders. - Triple-density-foam Performance Body Geometry Contour 3D Chamois is pre-molded to match the shape of the body for exceptional comfort. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - Welded bib upper construction reduces friction and dials-in the fit by reducing the need for seams. The bib upper fabric, meanwhile, incorporates a carbon yarn for anti-microbial and thermal regulation properties.
$185.00 - $200.00
The perfect pair of bib shorts don't feel like bib shorts—they don't feel like you're wearing anything at all. And from here on out, you'll wish all of the bib shorts you race in would disappear beneath you like the new SL bib shorts. You wanted top-shelf, and you got it. This unmatched comfort comes, in part, from our custom, pre-molded 3D Chamois. Not only is it pre-molded to the shape of your body and saddle to reduce wrinkles and pressure points, but it also features multi-density foam that ensures the utmost in comfort. The other half of the comfort equation comes from the fabrics and the fit. For example, the welded uppers get rid of seams altogether for the most comfortable straps possible, while an articulated design ensures the perfect fit when in the riding position. - Four-way stretch fabric provides ample comfort and a soft hand. - Welded bib upper construction reduces friction and dials-in the fit by reducing the need for seams. The bib upper fabric, meanwhile, incorporates a carbon yarn for anti-microbial and thermal regulation properties. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Articulated design ensures the perfect fit while in the riding position. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - Triple-density-foam Performance Body Geometry Contour 3D Chamois is pre-molded to match the shape of the body for exceptional comfort.
No matter what form your fitness takes on the bike, Specialized's Shasta Cycling Knickers are the perfect complement to your workout. They feature a construction that starts with knit VaporRize fabrics for a controlled, supportive feel and end with a minimalist top-of-the-line chamois for exquisite comfort in the saddle. In between, you'll find plenty of pockets for your music, keys, and other small belongings, as well as a second-skin fit that just screams, "I'm ready to do this." - Two side panel storage, one waistband stash, and one rear zipped pocket provide ample storage to house your nutrition, wallet, and electronics. - 18.5" inseam (size Medium) - CyTech chamois features a minimalist construction to provide just the right amount of padding, support, and comfort. - Reflective elements increase your visibility in low-light conditions. - Form Fit feels like a second skin, ensuring the proper amount of support and comfort, no matter the activity. - VaporRize knit fabrics are soft against the skin and rapidly wick away moisture to keep you dry and comfortable. - Deflect UV 50+ protects your skin from harmful, ultraviolet rays.
A secondary or replacement mount for 2008-2009 wired SpeedZone models. Does not include cadence wiring.
Page 1 of 3 Next page