Chainrings

The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

12 Good Reasons If you're looking for a bomber new chainring that can run with your Shimano 12 speed drivetrain, then look no further. This direct mount ring has the versatility of RF CINCH integration and the stiffness to turn all your "push" into straight-up "go". Built to Last Created from 4mm-thick 7075-T6 alloy plate for big-time stiffness and strength. Its NW tooth profile is Shimano 12-speed specific and provides secure chain retention All-Round Performer The Race Face CINCH interface makes this direct mount chainring fast and easy to swap for different sizes to customize your Shimano 12-speed drivetrain. - Compatible with Cinch Direct Mount Cranks - 7075 Aluminum - Direct Mount

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between. - 7075-T6 aluminum, aerospace grade strength - Compatible with 9, 10, 11 and 12 speed - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - Reversible laser etched graphics - Non-threaded bolt holes

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. - Compatible with 9, 10, 11, and 12 speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used

• Specific architecture for for Race Face, Shimano or Truvativ tabs • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • More upshift and downshift zones than Race Face Team rings • Three times stiffer than Team rings with greater impact resistance • Include outer chainring bolts • 104 and 64mm BCD • Four-bolt chainring pattern

- New Wave Technology tooth profile. Alternating teeth for better chain retention - Stamped and machined manufacturing with hard black anodizing for durability - Works with 1x10/11/12sp SRAM and Shimano chains - 104 BCD 30T is threaded and needs an M8 bolt with min 7.5mm length threads - Unauthorized online sales are prohibited by the manufacturer

Cold forged, high grade 4130 grade steel designed specifically for E-Bikes and longer wear - These e-rings are female-threaded. A regular male M8 CR bolt threads directly into this threaded e-ring for motor clearance. Mount with the logos facing outward - Narrow Wide tooth profile for better chain retention - Works with 1x10/11/12sp Shimano, KMC, and SRAM Eagle, Flat and T-type chains - Must use a ‘clutch’ type rear derailleur. Ex: Shimano Shadow or SRAM Type2 - Shimano compatible with both mechanical and Di2 Shimano 10/11/12sp. SRAM compatible with both mechanical and wireless SRAM 10/11/12sp - In rough terrain, or just for pure security, the use of an upper guide recommended - Unauthorized online sales are prohibited by the manufacturer

Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Stamped AL7075/T6 - Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains - Drivetrain Speeds: 11, 10

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Chromag's Sequence chainring uses X-SYNC technology licensed from SRAM for unmatched chain retention. So now, no matter what kind of riding you do, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. •104mm BCD

Our RaceFace Cinch Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11 and 12-speed systems. 9-speed drivetrains require a 10-speed chain - Direct mount for Race Face Cinch Boost cranks, 3mm offset for a perfect 52mm chainline - Direct mount for Race Face Cinch cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Proven cross-compatibility applied to an ultra-lightweight, durable AL-7075-T6 chainring. Highly CNC'd technical finish. Available to match Helix cassette colors, SRAM™ compatible 3-bolt design. A technology first. Combine with the chain, derailleur/shifter of choice without a change in chain retention quality. Build a dream rig with more freedom and spec creatively. Available in bold colors to match the popular e*thirteen Helix R Cassettes, Plus 35 Stems, and Quick Fill Plasma Valves. - Save weight, keep your drivetrain options open, and use the chain you want - 3-Bolt Direct Mount design for use with SRAM™ 3-bolt direct mount compatible cranks - Cut from billet AL-7075 for the highest strength and wear resistance - SRAM™ and Shimano™ 11 and 12 Speed Chain Compatible - Extensive CNC machining for lightweight and looks that kill - Available in 5 bold Ano colors and 4 sizes 28/30/32/34t - Match and personalize the way you want? - E*thirteen QuickConnect Direct Mount rings include 1mm spacers which allows them to be run on legacy cranks (TRS/LG1/XCX) as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile

Customize your ride with The Helix Race Direct Mount Chainring. Made from ultra-lightweight and durable AL-7075-T6, this chainring offers compatibility with SRAM™/Shimano™ chains and features a flip-flop design for chain line adjustment. With bold color options that match e*thirteen's popular components, it's the perfect addition to your dream rig, ensuring maximum strength and longevity. - E*thirteen QuickConnect Direct Mount rings include 1mm spacers, which allows them to be run on legacy cranks (TRS/LG1/XCX), as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile is compatible with both Shimano and SRAM chains in both 11 and 12-speed - Can be flipped to provide either a 52 or 55mm chainline

This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

The Wolf Tooth 107 BCD Chainring for SRAM Cranks is compatible with most new SRAM 1x road cranks that use the 107 BCD spider, including the SRAM AXS Power Meter Spider. This chainring uses the patented Wolf Tooth Drop-Stop B Wide/Narrow tooth profile that is optimized for drop bar bikes. - Fits 107 BCD for SRAM Cranks - Drop-Stop technology prevents dropped chains. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris while reducing friction. - Cranks that use the 107 BCD spider also use the SRAM 8-bolt interface, which is compatible with Wolf Tooth Direct Mount Chainrings for SRAM 8-Bolt More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper (like our GnarWolf) in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. - Recommend the use of a clutch-style rear derailleur for the best chain security. Tech Specs: - Material: 7075-T6 aluminum - Weight: 38t/75g | 40t/78g | 42t/86g - Made in the USA

Direct mount chainrings for SRAM cranks with 8-bolt mounting replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8-bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting. - All SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard. These cranksets use either 107 BCD or 94 BCD; any of those cranksets with a removable spider use the 8-bolt mount. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability - 6mm offset - Chainline 45mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - Recommend the use of a clutch-style rear derailleur for the best chain security - Use the included custom T20 bolts. Torque 4Nm with T20 tool Tech Specs: - Weight: 38T/81g | 40T/87g | 42T/97g | 44T/117g - Material: 7075-T6 aluminum - Made in the USA

The Pathfinder sprocket is 8mm thick and uses a unique 9-sided design that allowed WTP to integrate the sprocket mounting location into the spoke pattern, resulting in a super-clean looking sprocket with plenty of strength and longevity even for the most savage rider out there. - Full CNC 6061-T6 alloy - 9 rotation points for longer life - Sunken adapters for perfect chain line - Made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles

Felix Prangenberg signature super-tough 8mm-thick street sprocket/bash guard combo with 9 sprocket bolt holes integrated into the design for extra long life. MATERIAL: - Full CNC 6061-T6 alloy THICKNESS: - 8mm SIZES: - 25T, 28T SPECIAL FEATURES: - Bolt-on bash guard made exclusively for the Wethepeople Pathfinder sprocket - Securely attached using x4 hollow crmo sprocket bolts - 9 rotation points for longer sprocket life - Available as an upgrade for your current Pathfinder sprocket, or as a combo pack

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Material: Aluminum

- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)

- The oversized chainrings are CNC machined 7075 Aluminium blanks—2mm thicker than the competition. - Unparalleled stiffness is delivered by an increased Bolt Circle Diameter (BCD) and a two-piece insert-molded carbon composite construction. - The XX Crank geometry provides a narrow 156mm Q factor, efficient chainline, and beveled crank arms to maximize clearance. - X-Glide is the pure science in action common denominator that gives XX its unmatched shifting performance. - 80mm BCD

- Shimano, 32T, 9 sp, BCD 104mm, 4-Bolt, FC-M430-9, Middle Chainring, For MTB triple, Steel, Silver, Y1M098060

- Shimano, 22T, 9 sp, BCD 64mm, 4-Bolt, Deore FC-M590, Inner Chainring, For 22/32/44, Steel, Black, Y1LD22000

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Black - Defined Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer

- Shimano, GRX FC-RX810 1x11, Chainring, Teeth: 40, Speed: 11, BCD: 110, Bolts: 4, Single, Aluminum, Black

- Shimano, Tiagra FC-4703, Chainring, Teeth: 30, Speed: 10, BCD: 74, Bolts: 4, Inner, Steel, Grey, Y1RD30000

Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command. - Bolt circle diameter: 4-bolt 110mm asymmetric - 50T pairs with 34T inner ring - 52T pairs with 36T inner ring - 53T pairs with 39T inner ring Inner rings sold separately