Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Items listed online as "in stock" are a reflection of the Hillside locations inventory and are not necessarily available at the Sidney store. Please contact them at 250-656-1512 for confirmation. Items listed as "at supplier warehouse" are located at our supplier's warehouse and are not currently in stock at either location. Delivery times vary, sometimes up to two weeks. Please call the Hillside location if you have any questions at 250-384-4722.
$2,620.00
The ultimate in cockpit data integration. Personalize your ride and your data with RED AXS controls and the Hammerhead Karoo. Use Bonus Buttons to scroll your head unit or shift your derailleur from our most comfortable controls. FEATURES: - Aftermarket kit includes: Hammerhead Karoo, left and right Shift-Brake System controls, and flat mount calipers - Compatible with all generations of AXS derailleurs
$602.00
Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper
$589.00
- Charger 2.1 RC2 damper featuring independent high and low speed compression adjust - Includes complete right-side internals - Compatible with 2010+ BoXXer forks
$545.00
FORK LOWER LEG - (DECALS INCLUDED) 29 15X110 BOOST™ (38MM) W/ LOWER LEG PLUGS, ELECTRIC RED - ZEB ULTIMATE A1+ (2022+)
$544.00
Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper
$535.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$521.00
Built with input from the world’s best riders, Charger 3.1 RC2 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. FEATURES - Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day - Includes full right-side internals including controls - Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) - High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments - Includes vibration-fighting ButterCups to block 20% of trail chatter
$521.00
Built with input from the world’s best riders, Charger 3.1 RC2 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. FEATURES - Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day - Includes full right-side internals including controls - Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) - High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments - Includes vibration-fighting ButterCups to block 20% of trail chatter
$521.00
Built with input from the world’s best riders, Charger 3.1 RC2 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. FEATURES - Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day - Includes full right-side internals including controls - Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) - High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments - Includes vibration-fighting ButterCups to block 20% of trail chatter
$518.00
The new Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control. - Upgrades Charger 2.1 RC2 with crown high speed, low speed compression (includes complete right side internals) - Compatible with Zeb A1+ (2021+)/Domain B1+ (2022+)- Includes complete right-side internals
$518.00
The Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control. - Includes complete right side internals
$510.00
Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper
$270.00 - $438.00
Vendor Part # BKCJ-0500
$434.99
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
$224.99 - $399.99
Cane Creek's 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.
$391.00
The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. - Every detail machined and optimized to save on weight and maximize your performance - Factory tuned compression (in open position) provides the highest level of XC performance, precision and control - Maximum efficiency with a rock-solid lockout
$391.00
The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. - Every detail machined and optimized to save on weight and maximize your performance - Factory tuned compression (in open position) provides the highest level of XC performance, precision and control - Maximum efficiency with a rock-solid lockout
$391.00
The Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control. - Includes complete right side internals
$385.67 - $385.68
The ultimate fancy straddle wire holder - Integrated cable clamp & 8mm hex so you can put a wrench on it - Moon Units come as a set of 2
$385.65
Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multispeed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. Designed with adjustability in mind, the Chain Keeper can accommodate a range of chain line measurements and chainring sizes. - AL6061, black ano - Portion of seat tube where the clamp mounts must have a circular profile - For frames with tapered seat tubes, the Chain Keeper Extension can be used to raise the clamp to a higher section of tubing with a straight circular profile - 69g *** For more detailed information, please see the Chain Keeper Fit Guide at: http://paulcomp.com/chain-keeper-guide
$385.17
We set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, we’re proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. Machined by us right here in Chico California to the highest tolerances. - 6061 Aluminum - 22.2mm Clamp Diameter - 40g
$385.16
Thumbies are the original upright handlebar mount and easily transform bar end (aka barcon) shifters into thumb shifters. - 6061 Aluminum - Fits 22.2mm handlebars - Hinged clamp for easy installation - Compatible with Shimano bar end shifters (not included) - Updated! now have raised platforms to clear hydraulic disc brake levers - 60g
$320.00
RockShox 35mm Crown/Steerer/Uppertube Assemblies
$299.99
- Fastener kit with an assortment of nuts, bots and washers. - 475 Pieces, 18 Different Parts, Three Bolt Styles in Lengths 8 to 30mm - Assortment of commonly used bicycle fasteners
$289.99
Cassette spacers, bottom bracket spacers and hardware for HollowtechII, GXP, BB30/PF30. - Comprehensive shop kit for bottom bracket and cassette/freewheel spacing needs - 120 pc. kit in durable plastic storage box
$289.00
This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2017-2019 650b & 29" Includes: - 1x BikeYoke #7 (Y07) for low geometry setting with 210x55 shock (roughly -8mm BB and -0.5° HA) - 2x bearing - 1x DU bushing - 1x reducer - 1x stainless steel bolt
$272.00
MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. The kit includes a full selection seals and spacers to ensure proper installation in any BSA threaded bike. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA Vendor Part # BKSM-8112 This BB requires a Shimano XT BB tool for install and removal (ex. Abbey BB SCT, Park LRT-4)
$264.00
Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with Sram DUB crankset spindles - Flanged, double-row bearings with anti-corrosion Black Oxide/Magnetite treated, 52100 High-Carbon Chromium alloy races paired with grade 10 balls. Vendor Part # BK-7019
Page 1 of 46 Next page