Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Other

Items listed online as "in stock" are a reflection of the Hillside locations inventory and are not necessarily available at the Sidney store. Please contact them at 250-656-1512 for confirmation. Items listed as "at supplier warehouse" are located at our supplier's warehouse and are not currently in stock at either location. Delivery times vary, sometimes up to two weeks. Please call the Hillside location if you have any questions at 250-384-4722.
$5.99
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
$5.99
Shimano Y8H298040 SM-BH59 Olive and connecting insert
$9.99 $11.50 13% Off
QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
$10.49
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$11.99
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
$14.49
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
$14.99
Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.
$17.49
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
$21.99 - $22.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
$23.99
- Lighter, XTR-grade caliper adapters - Includes conical washer for better caliper alignment - Works with all post mount calipers Legend : SM-MA90-F203S/P : - Position : - F: Front - R: Rear - 203 : Rotor size Caliper type: - S: Int-A-standard - P: Post Suspension/frame type: - S: Int-A-standard - P: Post - B: Boxxer - Z: Marzocchi 20mm
$34.99 - $40.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$37.49
Shimano Rear Derailleur Pulley Assemblies
$41.49
Shimano Rear Derailleur Pulley Assemblies
$47.49
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace R9170 Di2 levers
$134.99
- EW-WU111 D-Fly wireless transmitter - Shifting customization, system diagnosis and firmware updates can now be done through Bluetooth Smart on smart phones and tablets, using the eTube app - Also allows to send shifting and system data to compatible cycle computers via private ANT+ protocol - Requires BT-DN110 internal battery or BM-DN100 external battery mount
$139.99 - $199.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
$179.99
- Internal junction-A with two e-Tube ports - Externally facing charging port eases charging, especially for internal batteries - Mounts in road bar end or in frames with an integrated mounting point - For easier cable routing, use along with EW-JC130 three-way e-Tube cable
Page 1 of 1