Other

End-plugs with opening for cable pass-through for aerobar extensions.

Set of 5 Torx bolts for faceplate and steerer clamp, for Arx II stems.

- Use in conjunction with Clip-On Team or Pro Aerobar base units - Aluminum extension pair with 22.2mm diameter - 305mm maximum extension from centerline of bar clamp

3T's S-Bend Aero Extensions are made of durable, stiff aluminum and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp

3T's Straight Aero Extensions are made of durable, stiff aluminum and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp

Pair extension clamps and fixings for Vola Ltd and Vola Team.

Riser kit comprises risers (2 x 10mm, 2 x 20mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 10mm, 20mm, or 30mm. - Material: Alloy - Bolts: Steel

Riser kit comprises risers (2 x 60mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 60mm.

Replacement clamp kit for Vola PRO and Clip on Pro/Team aerobars.

3T's Straight Aero Extensions are made of light, stiff carbon and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp

Comfort armrest set comprises pads and cradles and was original equipment on Ventus, use to upgrade Aura, Brezza II Team, and Mistral.

Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.

3T's S-Bend Aero Extensions are made of light, stiff carbon and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp

3T's Wrist Comfort Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists as comfortable as possible and ensure a sturdy grip during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp

Mounts at dropout to prevent derailleur damage. - Cut-outs allow smooth cable routing - Durable steel construction

Ultra-strong 1 piece construction. - Cut-out allows smooth cable routing for direct route derailleurs - Compatible with nutted and quick-release axles - Available in a variety of sizes to suit many types of bikes

Forged Alloy seat-clamp with QR lever.

Fun handlebar-mount streamers. - Quick and easy installation

Converts 31.8mm bar clamp diameter stems to accommodate smaller bar sizes.

Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp

Lightweight adjustable alloy kickstand. - Mid-mount

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Ultralight bashring for light duty, not designed for high impact - 1/8" thick chainring is ideal for singlespeed bikes - Anodized and laser etched

- Lightweight, super-efficient dual-ring chain guide for 2 x 10 drivetrains - Proprietary polymer slider silently guides chain with minimal wear and drag - Integrated bashguard protects chainrings - SRAM model specific to XX, XO, X9 and X7 2x10 cranks - 145-165g

- Lightweight, super-efficient chain guide with no moving parts - Proprietary polymer slider silently guides chain with minimal wear and drag - Integrated Beavertail bashguard - 160g

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Allows for the mounting of the EPS Power Unit beneath the bottom bracket - Only compatible with Chorus and Athena EPS systems

EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet