Other

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

Shimano Rear Derailleur Pulley Assemblies

The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Flat Mount Disc Caliper Bracket Bolts

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R

Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Trigger Clamp/Bolt Kit For X0 X9 X7

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings

Replacement hoods for SRAM hydraulic shifter/brake levers.

RockShox 35mm Seal Kit

RockShox 32mm Seal Kit

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

V2 Plus Aerobars with S-bend extensions offer a higher rise for comfort and reduced fatigue in the aero position. The aerobar features a low stack armrest position and forged bracket system that places the extension below the basebar. - F-19 adjustable anatomic armrests with 4 position fore/aft adjustment to dial in the fit, and Velcro-backed EVA foam pads that affix directly to armrest without straps - L1 Brackets: 6061-T6 Aluminum forged bracket system designed to place the armrest at the lowest stack possible and the extensions underneath the basebar Tech specs: - Extension: V2+ Aluminum - Stack: 35mm - Reach: -90mm, -75mm, -60mm, -45mm - Width: 150mm - 305mm - Extension Adjustment: 175mm – 130mm - Clamp: Fits 26.0mm and 31.8mm bars - Weight: 490g

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

Fits 2005 - 2009 Norco Fluid & Faze Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0022

SRAM’s Universal Derailleur Hanger for bikes with an M12 x 1.0mm rear axle thread. Fits: - 2020 Canyon Exceed - 2021 Santa Cruz 5010 v4 - 2022 Santa Cruz Bronson v4 - 2021 Specialized Stumpjumper EVO - 2021 Norcos w/ UDH v2.1 - 2021 YT Capra MK3 & YT Decoy MK2 - 2021+ Transition Patrol and Spire - 2021 Guerilla Gravity Trail Pistol and Gnarvana - 2021 Chromag Rootdown Ti - 2022 Canyon Spectral - 2021+ Pivot Switchblade - New bike models that feature the SRAM UDH standard. Supplied with mounting screw. Features: - CNC machined from 6061 T6 Aluminum - Anodized Pewter Finish - Model: NSB DH0152

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak

FSA Crank Arm Fixing Bolts - Set of 2