Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

650B

DT Swiss M 1900 SPLINE 30 27.5-inch Front
$288.99
Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.
Eclypse DB729/Novatec D881 27.5-inch Front
$599.99
- Eclypse DB729 Carbon - One piece molding - Inner Rim Width: 29 mm - Outer rim Width: 35 mm - Rim Height: 23.5 mm - Presta valve - 28 holes - DT Champion - Black - Tubeless ready, requires tubeless tape/rim strip, not included
Eclypse DB743/Novatec D881 27.5+ Front
$599.99
- Eclypse DB743 Carbon - One piece molding - Inner Rim Width: 43 mm - Outer rim Width: 50 mm - Rim Height: 25 mm - Tubeless ready, requires tubeless tape/rim strip, not included - Presta valve - 28 holes - DT Champion - Black
Giant TRX 0 27.5 Front
$899.99
The optimized carbon laminate in the new TRX 0 creates an optimized structure that delivers the perfect balance between strength and light weight. The result is efficiency and acceleration that gets you to the top of the mountain, while engineered compliance and vastly improved impact toughness ensure you enjoy the descent with confidence. - Hookless Design—Improves the consistency of the carbon structure and enhances overall strength - Rim Bead Reinforcement—Helps to disperse impact load and enhances overall toughness - Refined Inner Shape—Improves rim structure with redesigned smoother transitions - Precise Spoke Hole Reinforcement—Adds sufficient durability without adding additional weight - Dynamic Balanced Lacing—Enhances transmission stiffness for faster climbing and provides stiffer braking conditions for better control - Wider Rim Inner Width—Provides compatibility for higher volume tires to improve stability during hard cornering
Giant TRX 0 27.5 Rear
$1,199.99
The optimized carbon laminate in the new TRX 0 creates an optimized structure that delivers the perfect balance between strength and light weight. The result is efficiency and acceleration that gets you to the top of the mountain, while engineered compliance and vastly improved impact toughness ensure you enjoy the descent with confidence. - Hookless Design—Improves the consistency of the carbon structure and enhances overall strength - Rim Bead Reinforcement—Helps to disperse impact load and enhances overall toughness - Refined Inner Shape—Improves rim structure with redesigned smoother transitions - Precise Spoke Hole Reinforcement—Adds sufficient durability without adding additional weight - Dynamic Balanced Lacing—Enhances transmission stiffness for faster climbing and provides stiffer braking conditions for better control - Wider Rim Inner Width—Provides compatibility for higher volume tires to improve stability during hard cornering
Roval Traverse SL 27.5 6-Bolt Front
$1,060.00
Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flickable, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. - Front Spoke Pattern: Two-cross - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Front - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1690g
Roval Traverse SL 27.5 6-Bolt Rear XD
$1,380.00
Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flickable, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rear Hub: CNC-machined alloy body, high-quality DT 240 internals, and 54t quick engagement ratchet system cassette, includes SRAM XX1 11-speed freehub and 148 end caps. - Rear Spoke Pattern: Two-cross - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Rear - Spoke Type: DT Swiss Competition Race J-bend
Roval Traverse 38 SL Fattie 650b 148 Wheels
$1,904.00
The age of traction, stability, and speed has arrived, and its name is the Roval Traverse 38 SL Fattie 650b wheels. They feature 148mm rear and 110mm front axle widths, but to turn them into descending machines is the 38mm internal rim width. The extra width also allows for more tire volume, which means increased suppleness in the ride quality. And not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless. These wheels also include the Roval tubeless plug system, which is an easy and super lightweight solution for tubeless setups. At the front hub, you'll get a 15x110mm thru-axle (end cap options included), and at the rear, the hub features DT Swiss internals for quick engagmenet. And to top everything off, these wheels are hand-built to ensure a painstaking attention to detail. -Please note that this 148 version is exclusively designed for use with bikes designed with 110x15mm front axle and 148mm rear axle standards.
SRAM Roam 50 Front Wheel (650B)
$615.99
Fast climbs and fast descents, from sun up until sundown, are the norm on SRAM's Roam 50 Wheels. They boast a dedicated balance of low-weight, strength, and width to excel on a wide variety of XC and trail-bike terrain. The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. Ditch the tubes with full UST tubeless compatibility, and reap the rewards of excellent traction, control, and fewer flats. And, the Roams' great features continue with their Solo Spoke design that uses one spoke length to fit the entire wheel and quick-release skewer and 15mm end caps that can be interchanged without tools.
Spank 359 J-Bend 27.5-inch Front
$394.99
Hand-built to A-Class specifications, the 359 wheel with SPANK Hex Drive hub is the premium lightweight performance offer from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling - Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved - 30.5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles - Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures
Spank 359 Vibrocore 27.5-inch Front
$468.99
The low-profile, radially compliant alloy rim injected with SPANK's award-winning Vibrocore to add torsional strength and lateral stiffness, offers a smooth and highly responsive ride feel. Hand-built to A-Class specifications, the 359 Vibrocore wheels with SPANK Hex Drive hub is the premium offer from the SPANK wheelhouse and is trusted by pros on the UCI DH World Cup circuit, as well as big-mountain free-riders. This wheel is spec'd and built for the heavy hitters. - Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling - Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved. - Vibrocore inner well reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim - 30.5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles - Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures
Specialized Roval Traverse 38 SL Fattie 27.5 148
$2,200.00
While there may be a linear relationship between increased tire size and increased fun, this relationship only holds true when wider tires are paired with the correct width rims. Having a 2.8", or high-volume, tire mated to a narrow rim makes for a squirmy, poor handling experience, and when you’re on the hunt for additional fun, these characteristics are undesirable. Lucky for you, the new age of traction, stability, and speed has arrived—and its name is the Traverse 38 SL Fattie 27.5. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. While our 38-millimeter Traverse SL is already wider than most offerings, the benefits of three-inch tires become more apparent with a proper rim interface. In search for the proper width, our engineers tested various iterations, from 30 to 45 millimeters, to determine where the sweet spot lies. What they ended up with is a 38-millimeter internal rim width that turns the Traverse 38 SL Fatties into descending machines. A wide internal rim width endows riders with a variety of advantages that are exemplified even more with plus-sized tires. The extra width allows for more tire volume, translating into more supple ride qualities, and better support for the tire, meaning that you'll experience less "burping" when riding tubeless and a drastic increase in traction. After determining the proper rim width for the plus-sized application, we began designing the rim using the same low-weight, high-strength technologies used in the Traverse SL and the Control SL. With this, we started with our Zero Bead Hook design that effectively eliminates the biggest weak spot found in traditional rims, and topped it off by using high-modulus carbon fiber to keep the weight down. And to further this theme, the wheels also include the Roval tubeless plug system, which sheds an additional 50 grams-per-wheel compared to a rim strip Each Traverse 38 SL Fattie is hand-built to our own alloy hubs with DT Swiss Competition Race spokes. Inside our hubs, you'll find sealed cartridge bearings all-around, and a quick-engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a decent job of building wheels, we choose professionally trained humans to build ours, as they catch various flaws that a machine would otherwise miss.
Stan's NoTubes Arch MK3 27.5 Front Wheels
$433.99
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps
Stan's NoTubes Crest MK3 27.5 Front Wheels
$433.99
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
Stan's NoTubes Sentry MK3 27.5-inch Front
$433.99
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction delivers width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheels are a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs.The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and presta valve. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
Stan's NoTubes Hugo 52 27.5 Front Wheels
$449.99
Hugo’s ultra-low profile sidewalls combine with a special central raised box section to create a structurally superior fat rim that’s exceptionally light, fast-rolling, and nearly impervious to flats, even when using tubes. The shape of the rim creates a superior seal — making tire inflation easy without a tube — and spreads the tire's contact patch for better strength and support with excellent pinch flat protection. Hugo wheels include: pre-installed tape for tubeless use and schrader valve system; 15x100mm front wheels include quick-release end caps and quick release. - For fat bike riding, racing and adventuring - Genuine NoTubes' tubeless technology with innovative raised center rim profile for tubeless use - Rim width: 53.1mm external and 49.9mm internal for maximum tire volume and flotation - Compatible with plus and fat clincher tires when used with 27mm Yellow Tape, 35mm Valve Stem, and NoTubes Sealant
Stan's NoTubes Baron MK3 27.5-inch Front
$499.99
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with a 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
Stan's NoTubes Arch MK3 27.5-inch Rear
$516.99
Designed with input from Stan's Enduro World Series teams, the Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 rim weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan's NoTubes rims. - Tubeless ready with rim tape and valves installed - The perfect balance of strength and weight 24% wider than the Arch EX for improved stability with larger tires - Same low weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Stan's Neo 6-pawl, 36-point disc hubs feature a 10-degree engagement - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.25"-2.50" Trail tires
Stan's NoTubes Crest MK3 27.5-inch Rear
$516.99
Wider and even lower profile, the new Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Stan's Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. - Tubeless ready with rim tape and valves installed - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Legendary Crest climbing and speed in a high volume rim - WideRight optimized for 2.00"-2.25" XC tires
Stan's NoTubes Hugo 52 27.5-inch Rear
$529.99
While their origins can be found in bikes built to tackle such legendary events as the Iditarod Trail Invitational and the Arrowhead 135, today's fat bikes have evolved into much more than sluggish snow crawlers. With the release of the first NoTubes rims designed specifically for this emerging category, there are now rims designed to push the boundaries of what a fat bike can do. While Stan's Hugo 52 for Plus Bikes are the first fat rims to feature Stan's Bead Socket Technology, the innovations don't stop there. Hugo's ultra-low profile sidewalls combine with Stan's special central raised box section to create a structurally superior fat rim that's exceptionally light, fast-rolling, and nearly impervious to flats even when using tubes. Of course, BST means the best tubeless technology available, and the special shape of the Hugo series rims creates a superior seal, inflating easily without a tube. Stan's interior rim shape also spreads out the overall contact area for better strength and support and excellent pinch flat protection. Fat bike rims with taller sidewalls and recessed center cavities can't touch Hugo's added stability and tubeless performance, and those who choose to use a tube will find Stan's profile makes pinch flats virtually impossible. The next generation of fat bike rims has finally arrived. Hugo wheels include pre-installed tape for tubeless use and Schrader valve system; 12x142mm rear wheels also include quick-release end caps and quick release. - For fat bike riding, racing, and adventuring - First fat bike rim to feature genuine NoTubes' tubeless technology with innovative raised center rim profile for tubeless use - Rim width: 53.1mm external and 49.9mm internal for maximum tire volume and flotation - Compatible with plus+ and fat clincher tires when used with 27mm Yellow Tape, 35mm Valve Stem, and NoTubes Sealant
Stan's NoTubes Bravo Pro 27.5 Front Wheels
$1,399.99
Built for all-day trail rides and enduro racing, and developed with the World Championship-winning Atherton DH Team, our new Bravo wheelset rethinks carbon ?ber from the ground up. The Bravo's Radial Impact Absorbing Carbon Technology (RiACT) is three times stiffer than our aluminum rims laterally, but absorbs radial impacts to withstand bigger hits and roll faster. Patented Bead Socket tubeless technology improves traction, and creates a lighter, stronger rim. Weighing less than 1720g (29er), the Bravo's 32mm WideRight pro?le increases tire volume without negatively affecting tread shape or sidewall height. With the added durability and quick engagement of our new Neo and Neo Ultimate hubs, the Bravo is the new benchmark for all trail wheelsets. Bravo wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for Trail, All-Mountain and Enduro Racing - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Force 2.0/1.7/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider Trail and All-Mountain tires - 2-year warranty with 3-year crash replacement
Stan's NoTubes Bravo Pro 27.5 Rear Wheels (Shimano)
$1,499.99
Built for all-day trail rides and enduro racing, and developed with the World Championship-winning Atherton DH Team, our new Bravo wheelset rethinks carbon fiber from the ground up. The Bravo's Radial Impact Absorbing Carbon Technology (RiACT) is three times stiffer than our aluminum rims laterally, but absorbs radial impacts to withstand bigger hits and roll faster. Patented Bead Socket tubeless technology improves traction, and creates a lighter, stronger rim. Weighing less than 1720g (29er), the Bravo's 32mm WideRight profile increases tire volume without negatively affecting tread shape or sidewall height. With the added durability and quick engagement of our new Neo and Neo Ultimate hubs, the Bravo is the new benchmark for all trail wheelsets. Bravo wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for Trail, All-Mountain and Enduro Racing - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Force 2.0/1.7/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider Trail and All-Mountain tires - 2-year warranty with 3-year crash replacement
Stan's NoTubes Valor Pro 27.5 Rear Wheels
$1,499.99 - $1,719.02
Lighter and stronger than aluminum rims, the Valor’s carbon lay-up is engineered to absorb radial vibrations and impacts through a construction that is both elastic and strong. Stan's NoTubes has constructed a lightweight carbon fiber rim design not just to be stronger than aluminum, but also to perform better in real world riding conditions. Valor wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for cross country racing and riding - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Laser 1.8/1.5/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider tires / 2.00 - 2.25 - 2-year warranty with 3-year crash replacement
The Wheel Shop Evo E-Tour 19/Formula DC-20 27.5-inch Front
$59.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Front
$1,359.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Rear
$1,499.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Rear
$1,799.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Page 1 of 1