Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

Super B Cotterless Crank Tool
$8.99
TB-6617: Cotterless crank tool for Shimano splined octalink and ISIS, Use with 8mm hex key wrench and 15mm spanner. TB-6616: Cotterless crank tool for use with 8 mm hex key wrench and 15mm spanner.
Super B T-Shaped Chainring Nut Multi-Wrench
$13.99
Chainring nut wrench for Torx 40/6mm hex
Specialized EMT 12 Tool
$35.00
When everything but the kitchen sink is all that will suffice, you need the EMT 12 Tool. With 12 different tools, you'll be prepared to fix whatever bad luck mechanical the road or trail decides to throw your way. - Forged aluminum side plates. - Forged steel bits are nickel plated for corrosion resistance. - 2, 2.5, 3, 4, 5, 6, and 8mm hex bits - T25 Torx, Phillips head, and flat blade screwdriver bits. - Chain breaker with spoke wrenches. - Forged aluminum side plates.
Specialized EMT Cage Mount Multi-Tool
$55.00
Attach this handy multi-tool to your Specialized SWAT-equipped water bottle cage (sold separately) and hit the trails secure in the knowledge that your tools are close at hand. The tool features hardened steel bits with an anti-rust coating and the plastic tool cradle holds securely and rattle-free thanks to the two attachment points.
Specialized Rib Cage II w/Tool
$70.00
This particular Rib Cage II was designed with an integrated EMT Cage Mount Road Tool that has all of the roadside necessities required to get you out of a jam on your ride. For the bottle cage itself, you'll find it to be not only a sleek, lightweight water bottle cage, but also fast in the wind and with tremendous holding power for when the roads get rough. - SWAT design allows for storage and tool integration. - Low bottle position improves aerodynamic profile. - Includes EMT Cage Mount Road Tool with 2, 2.5, 3, 4, 5, 6, and T25 Torx. - Reinforced composite material improves durability without adding weight. - Designed with compression for improved bottle hold, while also maintaining easy entry and exit. - Sleek, minimalist design with razor-sharp graphics.
Specialized Road Tube Spool
$25.00 - $30.00
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
Specialized S-Works Zee Cage w/ Multi-tool
$75.00
Specialized's Zee Cage integrates an EMT Cage Mount multi-tool, easily allowing riders to combine hydration and repair equipment in an amazingly clean, tidy solution. The cage is available in either a right- and left-hand bottle load, perfect for full suspension and smaller frames.
SRAM Ceramic Bearing Grease
$7.99 - $8.99
SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.
RockShox Bleed Kit
$61.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
Pro Torque Wrench
$189.99
• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box
Park Tool Chain-Wear Indicator
$16.99
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park Tool Folding Hex Wrench Set (1.5-6mm)
$14.99
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park Tool PolyLube 1000 16-Ounce
$26.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool Spoke Wrench
$11.99 - $13.99
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
Park Tool Triple Spoke Wrench
$15.99
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Muc-Off Nano-Tech Gel Concentrated
$29.99 - $44.99
- Same award-winning Nano-Tech cleaner in a concentrated form - One 500ml Pouch will make 2x 1L nano-tech cleaner bottle - Can be used as a powerful degreaser in its concentrated form - Works really well in a chain cleaning device like Muc-Off X-1 - Safe on all bike parts or all bike frame materials
Muc-Off Water Soluble Degreaser
$19.99
Our Water Soluble Degreaser quickly and safely eliminates built-up oil, grease and grime on metal, plastic, rubber and seals. Its unique, biodegradable formula means that after use it can be quickly rinsed away with water to leave your greasy bike parts completely clean. Our R&D team put in the hours to make sure the Water Soluble Degreaser works on even the toughest of grime including waterproof grease and chain lube residue! - Bio Formula easily cuts through tough grease - Can be used on chains, gears, and individual components - Water-soluble formula for easy cleaning - Works on tough waterproof grease and chain lube residue - HazMat item not eligible for air shipment
Finish Line Dry Lubricant w/Teflon
$9.99 - $52.99
Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant
Finish Line Ecotech Degreaser
$16.99 - $109.99
- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air
Finish Line Wet Lubricant
$9.99 - $52.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
Zipp Bearing Grease
$17.00
Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.
Zipp Professional Internal Nipple Tool
$124.99
Zipp's shop-level tool is for use with Zipp custom 5.2mm internal nipples. There are two driver lengths: 55mm and 150mm.
Zipp Tangente Tube Wrench
$10.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Zipp Tubeless Kit
$83.00
- Kit includes tape, 2 valves & 1 valve core wrench
Wolf Tooth Components EnCase System Bar Kit One
$179.99
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Wolf Tooth Components EnCase System Bits
$31.99
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
Wolf Tooth Components EnCase System Chain and Tire Plug Multi Tool
$74.99
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
Wolf Tooth Components EnCase System Hex Bit Wrench Multi Tool
$74.99
Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)
Wolf Tooth Components EnCase System Storage Sleeves
$54.99
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
Wheelsmith Spoke Prep
$36.90
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
Page 1 of 20 Next page