Filter By:
Tools
Items listed online as "in stock" are a reflection of the Hillside locations inventory and are not necessarily available at the Sidney store. Please contact them at 250-656-1512 for confirmation. Items listed as "at supplier warehouse" are located at our supplier's warehouse and are not currently in stock at either location. Delivery times vary, sometimes up to two weeks. Please call the Hillside location if you have any questions at 250-384-4722.
$20.80 - $26.90
- For installation and removal of 20t splined Shimano/ISIS bottom brackets
- To be used with 1/2" driver
$28.30
- Compatible for Bosch Active/Performance line
- Use with 1/2 driver
$22.00
Bottom Bracket Installation tool for Shimano Hollowtech II
$30.70
- Cable Cutter
- Cuts cable, housing and wire quickly and easily.
- Thumb-lock closure is easy to open and protects cutter when closed.
$28.30
Cable plier, with a thumb lock to hold the cable tight for one-hand operation.
$23.40
- Chain Scrubber
- 20 total brushes with exclusive 4-sided scrubber system clean chain spotlessly.
- Rubber band added to allows it to hang on the seat stay by itself, without the need of holding the chain scrubber with your own hand. This provides more efficiency while cleaning.
- Contains one spare sponge.
-8mm-451609-3352121-1.png)
$7.80
- Vinyl cushion-coated on long side for better grip (can be trimmed to expose hex for use)
- Extra long for increased leverage (200mm)
$8.50
- Plastic-coated CrMo steel construction
- Color-coded for easy identification
- Wider wing designed for higher torque capability
$71.70
- LF3500 includes: 13 14 15 16 17 18 and 19mm cone wrenches
- Constructed from CrMo steel with rubberized grip handle
$21.70
- Crank Remover
- With patented interchangeable adaptor fits both square & hollow axles.
- For use with 8mm hex key wrench.
$27.40
- Crank Extractor
- Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal.
- Patented interchangeable adaptor fits both square & hollow axles.
$25.80
- The remedy to pesky bent rotors
- Updated design has longer handle to make bending the rotor much easier
$36.50
- Compatible with various external bottom brackets (Shimano FSA Race Face)
- Uses either a 1/2 3/8 driver or 8mm hex
$15.10
- Spoke Wrench w/8 notches for 10 - 15 ga nipples
- Forged Cr-Mo
$12.70
- Hex Key Wrench Set
- Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end
$17.60
- Nipple Wrench for Deep Rims
- The V-spring grabs the nipple to screw on deep rims to prevent the nipple from dropping.
- With depth control function to release the nipple after 3~4 mm on the spoke.
- Also can use with 1/4" electric screwdriver.
$54.00
- Ocarina Torque Wrench Set
It's lightweight and smart design.
- Tightening force to the correct torque easily, no need to set up the tool between various torque, for 3~10N?m rating.
- The ergonomic handle holds 3/4/5/6mm hex keys and T-25 in one tool.
- Ideal for all mechanics and avid riders.
$107.00
- One-way Torque Wrench
- 5-25 N'm. for 1/4" and 3/8 drive sockets
- 21~105N·m, for 3/8" & 1/2" drive sockets
$4.00
- POM Tire Levers
- Set of 3 pieces.
- Unique V shaped design can be easily fixed on the spokes.
- Air vent function added on back.
- Smart V shaped design on back is a fulcrum on the rim for tire removal
$29.90
- Designed to be used trail or road side
- Features a thumb protector chain hook and storage compartment to keep spare links or pins
$43.00
- Press-Fit Bearing Removal Tool
- For internal diameter 24mm to 30mm bottom bracket bearings
$131.70
- Tap Pro set w/handle & pouch for
- 3m X 0.5 dropout alignment screws
- 5m x 0.8 water bottle, fender eyelets
- 6m x 1.0 anti-brake large fender bracket
- 10m x 1, derailleur hanger
- 1/2 x 20tpi left & right pedal taps
- 9/16 x 20 tpi left and right pedal taps
Page 1 of 2
Next page